Heating System Service Agreements

Comprehensive plan for oil–fired furnaces that provides annual maintenance; annual safety check; priority emergency service; free service for warranted parts; and discount on non–warranted work.

Priority Emergency Service Free service for the replacement or repair of warranted parts. Service for non–warranted work will be billed at 20% off our standard flat rate.

Annual Preventive Maintenance - Heating You can save money and burn less oil by having your Heating System maintained by our experienced service technicians. We follow the standards set by the Environmental Protection Agency so that your burner will operate at its highest possible efficiency. Based on an initial combustion efficiency test we will perform 18 to 29 of these steps annually, as determined by our technician.

1. Check With Customer About Heating System.
2. Check Operation From Thermostat.
3. Check And Clean The Heat Exchanger, Flue Piping And Base Of Chimney.
4. Reseal Collector Flue Box, Chimney Base, And Cleanout Ports
5. Check And Replace The Nozzle, Oil Filter And Strainer If Necessary.
6. Check And Clean The Nozzle Drawer Assembly, Burner Fan, And Blast Tube.
7. Clear Oil Lines.
8. Check Pump Operating Pressure, Pump Cut–Off, And Pump Vacuum.
9. Check Safety Lockout Timing.
10. Check OHMS Reading of Cad Cell.
11. Check Transformer.
12. If Hot Water, Check Aquastat Settings. Check High Limit By Adjusting It Until Unit Stops.
13. If Hot Water, Check Boiler Pressure.
14. If Hot Water, Check Expansion Tank.
15. If Hot Water, Check To See That All Zones Deliver Heat On A Call From The Thermostat.
16. If Hot Water, Check The Circulator, Circulator Couplings, Zone Valves And Bearing Brackets If Applicable.
17. If Hot Water, Check For Water Leaks.
18. If Steam, Check And Flush Low Water Cut-Off.
19. If Steam, Check, Clean, And Replace Sight Glasses (If necessary) In Low Water Cut–Off.
20. If Warm Air, Check And Lubricate Blower Motor And Bearings. Check And Clean Blower Wheel. Check Blower Belt.
21. If Warm Air, Check Heat Exchanger For Cracks.
22. If Warm Air, Replace Company Furnished Air Filters. If Non–Standard, Offer To Replace Customer Furnished Air Filters.
23. Clean Surface Area Of Furnace.
24. Remove Old Parts And Debris From Furnace Area. (Ask Customer First.)
25. Install New Furnace Sticker If Necessary.
26. Shock Treat Oil Tank If Sludge Is In Evidence. If the Oil Tank Is In The Basement Or Garage, Check The Oil Tank's General Condition And Check For Leaks
27. Perform Instrumented Combustion Efficiency Test And Adjust Burner For Optimum Efficiency.
28. Discuss With Customer Your Findings.
29. Report Any Additional Work If Needed To Your Supervisor And Arrange, If Appropriate, With The Customer And The Service Coordinators A Time To Do The Work.

Free Replacement or Repair
The following parts will be replaced free if they fail — labor is included.

In addition, this plan offers:

• A $75.00 credit toward repair of any heating item not covered. Such items are, but are not limited to: circulator motors, blower motors, pressure relief valves, pressure reducing valves, flow control valves, zone valves, zone valve heads, circulator assemblies, blower assemblies, mixing valves, combination primary and triple acting aquastats, triple acting aquastats, and integrated circuit boards. For boilers this means such items as system managers, Logamatic, tekmars, and taco zone relays. For warm furnaces this means all oem and universal integrated circuit boards.
• Coverage of additional zones at a cost of $10.00 per zone.

All of this for ONE ANNUAL CHARGE – $259.95

Click here to read full plan details

Basic plan for oil–fired furnaces that provides annual maintenance; annual safety check; priority service; and discount on service work.

Priority Service Contract customers receive our top priority. Our normal work hours are 7 AM to 7 PM Monday thru Friday. For calls received after these hours there will be a $99.95 trip fee.

Annual Preventive Maintenance - Heating
You can save money and burn less oil by having your Heating System maintained by our experienced service technicians. We follow the standards set by the Environmental Protection Agency so that your burner will operate at its highest possible efficiency.

Each year we will:

1. Check With Customer About Heating System.
2. Check Operation From Thermostat.
3. Check And Clean The Heat Exchanger, Flue Piping And Base Of Chimney.
4. Reseal Collector Flue Box, Chimney Base, And Cleanout Ports
5. Check And Replace The Nozzle, Oil Filter And Strainer If Necessary.
6. Check And Clean The Nozzle Drawer Assembly, Burner Fan, And Blast Tube.
7. Clear Oil Lines.
8. Check Pump Operating Pressure, Pump Cut-Off, And Pump Vacuum.
9. Check Safety Lockout Timing.
10. Check OHMS Reading of Cad Cell.
11. Check Transformer.
12. If Hot Water, Check Aquastat Settings. Check High Limit By Adjusting It Until Unit Stops.
13. If Hot Water, Check Boiler Pressure.
14. If Hot Water, Check Expansion Tank.
15. If Hot Water, Check To See That All Zones Deliver Heat On A Call From The Thermostat.
16. If Hot Water, Check The Circulator, Circulator Couplings, Zone Valves And Bearing Brackets If Applicable.
17. If Hot Water, Check For Water Leaks.
18. If Steam, Check And Flush Low Water Cut-Off.
19. If Steam, Check, Clean, And Replace Sight Glasses (If necessary) In Low Water Cut-Off.
20. If Warm Air, Check And Lubricate Blower Motor And Bearings. Check And Clean Blower Wheel. Check Blower Belt.
21. If Warm Air, Check Heat Exchanger For Cracks.
22. If Warm Air, Replace Company Furnished Air Filters. If Non-Standard, Offer To Replace Customer Furnished Air Filters.
23. Clean Surface Area Of Furnace.
24. Remove Old Parts And Debris From Furnace Area. (Ask Customer First.)
25. Install New Furnace Sticker If Necessary.
26. Shock Treat Oil Tank If Sludge Is In Evidence. If the Oil Tank Is In The Basement Or Garage, Check The Oil Tank's General Condition And Check For Leaks
27. Perform Instrumented Combustion Efficiency Test And Adjust Burner For Optimum Efficiency.
28. Discuss With Customer Your Findings.
29. Report Any Additional Work If Needed To Your Supervisor And Arrange, If Appropriate, With The Customer And The Service Coordinators A Time To Do The Work.

Annual Safety Check

The flame monitor will be checked annually.

Service Parts And Labor

All heating service will be billed at 20% off our standard rates.

All of this for ONE ANNUAL CHARGE – $139.95

Click here to read full plan details

Available Only To Our Automatic Delivery Customers

We Think Everyone Should Elect Our Presidential Furnace Protection Plan!

Hail to the chief of service agreements ... our Presidential Furnace Protection Plan. With this comprehensive program, you'll lower your heating costs, reduce oil burner emissions, eliminate maintenance costs ... and that's only the beginning!

• FREE EMERGENCY SERVICE 24 hours a day, 365 days a year for warranted parts and labor. In addition, for any item not covered, we will perform the repair at 20% off our standard job rates.
• ANNUAL 29–POINT FURNACE INSPECTION & TUNE-UP, which may reduce your oil consumption by up to 5%, in addition to improving equipment life. Your annual safety check will also be performed during your tune-up.
• FREE REPLACEMENT OR REPAIR – includes all heating system parts which fail during normal use, including the entire boiler or furnace!
• ANNUAL SAFETY CHECK The flame monitor will be checked for safe operation at time of tune–up

Let us state that again ... this plan includes free replacement or repair of your boiler or furnace.

All of this for ONE ANNUAL CHARGE – $329.95
This offer is subject to an Initial Inspection.

Click here to read full plan details